Walrus Audio Iron Horse V2 LM308 Distortion Effects Pedal
or
Buy from our Reverb Shop
(While we are working on our eCommerce shop, you can buy this in our Reverb shop at the link above)
From Walrus Audio:
The Iron Horse V2 is a return to the classic distortion: thick, punchy, riffy and rowdy. The true bypass, high gain behemoth has been updated to help steer the stallion or let the reins loose for full on distorted onslaught. Dial back the gain and it can be used as a thick, warm overdrive.
The Iron Horse V2 is a return to the classic distortion: thick, punchy, riffy and rowdy. The true bypass, high gain behemoth has been updated to help steer the stallion or let the reins loose for full on distorted onslaught. Dial back the gain and it can be used as a thick, warm overdrive.
The Iron Horse has three distortion modes operated by a toggle switch that changes between different clipping diodes providing more versatility in shaping the tone of the distortion. Left will give some compression. Right will give you a higher amount of compression and middle will give you a wide open, non compressed signal.
The Iron Horse V2 updates are as follows:
- Updated the Level control so that it is easier to dial in unity gain.
- Updated the Tone control to allow more treble to be dialed in if desired.
- Updated Distortion control to smooth out the range of distortion making it easier to dial in lower gain tones.
• The Iron Horse V2 comes in a Galaxy Gold finish with black ink. Artwork by illustrator Adam Forster features a new battle ready stallion cloaked in armor.
• 9V DC 10mA – 4.77 x 2.9 x 2.3 inches.
• The use of an isolated power supply is recommended for powering all Walrus Audio Pedals. Daisy chain power supplies are not recommended.
• Power supply not included.
